Dispensing systems for all materials
Greasing, bonding, sealing, potting and gasketing all in one
We supply components as well as 1K and 2K metering systems for greasing, bonding, sealing, potting and gasketing. All systems can be partially or fully automated or integrated into production lines. Our engineers configure your metering and mixing system according to the material being processed and your objectives.
Greasing and oiling
For the application of greases and oils, we put together the optimum system from our modular product range – from various material supply systems and pumps to metering valves, dispensing valves and process monitoring. We supply metering systems for all lubricant applications, including for contactless material application. Metering valves and dispensing valves in various forms enable dot, bead or spray application in consistent quality. Precise measuring units ensure reliable process monitoring of the metering systems and offer high reproducibility, which is particularly necessary in highly automated applications.
Bonding, sealing, potting
For metering adhesives, sealants and potting compounds, we offer various metering systems with piston, gear and eccentric screw pumps. They process low to high-viscosity materials such as epoxy, polyurethane or silicone precisely and reliably. The modular design of the metering systems ensure versatile use in all industries. The mixing ratio and the discharge quantity can be variably adjusted. A touch panel enables convenient monitoring and setting of all relevant parameters. All common systems for pre-treatment and post-treatment, such as plasma, heating and cooling, can be integrated.
Processing sealing foams and thermally conductive materials
For processing thermally conductive materials, we work with special materials and coatings that are suitable for the metering and mixing of highly abrasive materials. We specially developed dynamicLine for the dynamic mixing of polymer reaction materials based on polyurethane or silicone. It offers a reliable solution for automated series production in relation to gasketing, bonding and potting.
Are you looking for the right metering system for your application? Our experts would be happy to configure an appropriate and cost-efficient solution for you.
We are happy to help
Applications at a glance
-
Whether it be racks, headrests, door locks or just the wheel bearings in automobiles, all must be greased. DOPAG provides the optimum metering system for each of these applications.
-
Bonding and sealing is becoming an increasingly popular method of joining components without screws. With DOPAG systems, applications can be realized reliable and precise.
-
DOPAG offers reliable solutions for the manufacture of fibre composite components, for example RTM, Filament Winding, Infusion, Pultrusion, etc.
-
DOPAG offers specially developed dosing systems for dosing thermally conductive materials such as gap fillers, adhesives and sealants or potting compounds.
Application cases
-
DOPAG develops a metering and mixing system for adhesive bonding of automotive components to ensure uniform standards worldwide.
-
DOPAG offers furniture manufacturers flexible and reliable solutions for the automated application of lubricants.
-
For the automated application of PU gaskets to control cabinet doors, DOPAG provides a dynamic mixing system in combination with a linear robot and shuttle sliding tables.
-
With the dispensing system coredis, the honeycomb core of sandwich panels, which are used for the interior of aircrafts, could be filled homogeneously.
-
The metering and mixing system volumix provides a smart solution for filling cartridges with adhesives and sealants in aircraft production.
-
DOPAG successfully supported a truck manufacturer with a dispensing system for the manual application of a single-component sealant.
-
With the dynamicLine from DOPAG, customers will be able to implement gasketing and bonding applications with just one system.
-
With dynamicLine, the metering technology manufacturer DOPAG presents a new dynamic mixing system for a wide range of applications.
-
Individual grease and adhesive dispensing systems from DOPAG guarantee highest quality electric parking brakes.
-
DOPAG developed a special dosing system for the automated lubrication of gas springs.
-
The requirements for the type of lubricant dispensing vary and always depend on the application being carried out. Learn here more about the four key factors for successful system design!
-
Valves for the spray application of grease and oil. Contactless application of lubricants in areas difficult to access.
-
The membrane dispensing valve ensures a clean application and a high reliability in automated dosing processes.
-
Using thermal gap fillers leads to more advanced metering technology requirements - learn more about the solutions from DOPAG.
-
DOPAG presents the shot valve in a new video: It is perfectly suited for contactless material application in highly automated processes.
-
CTO Daniel Geier talks in the interview about challenges in automated dispensing technology.
-
DOPAG provides automated potting solutions for variuos applications - two practical examples!
-
The eldomix dispensing system fills material reservoirs of 3D printers with liquid printing technology.
-
DOPAG has developed two special lubricant application systems for the production of ball screws in automotive industry.
-
Compared to manually inserted seals, automatically applied PU gaskets offer many advantages.
-
The control cabinet manufacturer Fandis applies foam gaskets on various components. DOPAG has designed a FIPFG system for this application.
-
DOPAG presents a production cell, that could be used for greasing and oiling applications. Disocver also valves for contactless material application.
-
The household appliance manufacturer Amica uses an invidual glue dosing system from DOPAG for the production of oven doors.
Application cases
-
DOPAG develops a metering and mixing system for adhesive bonding of automotive components to ensure uniform standards worldwide.
-
DOPAG offers furniture manufacturers flexible and reliable solutions for the automated application of lubricants.
-
For the automated application of PU gaskets to control cabinet doors, DOPAG provides a dynamic mixing system in combination with a linear robot and shuttle sliding tables.
-
With the dispensing system coredis, the honeycomb core of sandwich panels, which are used for the interior of aircrafts, could be filled homogeneously.
-
The metering and mixing system volumix provides a smart solution for filling cartridges with adhesives and sealants in aircraft production.
-
DOPAG successfully supported a truck manufacturer with a dispensing system for the manual application of a single-component sealant.
-
With the dynamicLine from DOPAG, customers will be able to implement gasketing and bonding applications with just one system.
-
With dynamicLine, the metering technology manufacturer DOPAG presents a new dynamic mixing system for a wide range of applications.
-
Individual grease and adhesive dispensing systems from DOPAG guarantee highest quality electric parking brakes.
-
DOPAG developed a special dosing system for the automated lubrication of gas springs.
-
The requirements for the type of lubricant dispensing vary and always depend on the application being carried out. Learn here more about the four key factors for successful system design!
-
Valves for the spray application of grease and oil. Contactless application of lubricants in areas difficult to access.
-
The membrane dispensing valve ensures a clean application and a high reliability in automated dosing processes.
-
Using thermal gap fillers leads to more advanced metering technology requirements - learn more about the solutions from DOPAG.
-
DOPAG presents the shot valve in a new video: It is perfectly suited for contactless material application in highly automated processes.
-
CTO Daniel Geier talks in the interview about challenges in automated dispensing technology.
-
DOPAG provides automated potting solutions for variuos applications - two practical examples!
-
The eldomix dispensing system fills material reservoirs of 3D printers with liquid printing technology.
-
DOPAG has developed two special lubricant application systems for the production of ball screws in automotive industry.
-
Compared to manually inserted seals, automatically applied PU gaskets offer many advantages.
-
The control cabinet manufacturer Fandis applies foam gaskets on various components. DOPAG has designed a FIPFG system for this application.
-
DOPAG presents a production cell, that could be used for greasing and oiling applications. Disocver also valves for contactless material application.
-
The household appliance manufacturer Amica uses an invidual glue dosing system from DOPAG for the production of oven doors.