Transfer pumps

Feed material directly from original containers

Depending on the application type, it may be useful to be able to supply material directly from the original containers using a transfer pump. DOPAG transfer pumps are double-acting pumps with a fast-switching air motor. It should be noted that the use of transfer pumps is always dependent on the material properties and the container type.

Features

  • Low viscosity material feeding via a bung hole
  • Flow rate up to 1.0/6.0 litres/minute at 20 double strokes
  • Pressure ratio up to 21:1/36:1
  • Max. viscosity 80'000 mPas
  • Sealing available in various sizes and material finish

Technical Specifications

Basis version TP20
505.05.30
TP60
505.05.31
TP200
505.05.32
TP200
505.05.82
FP300
Pressure ratio
(drive)
21:1 21:1 21:1 7.6:1 11:1/23:1/37:1
Flow rate
(at 20 double strokes)
l/min
0.80 0.80 0.80 2.24 6.00
Material viscosity
mPa s
50.000 50.000 50.000 50.000 50.000
Working pressure (max.)
bar
100 (160) 100 (160) 100 (160) 50 (80) 250
Air consumption
(at 20 double strokes)
l/min
142 142 142 142 450 / 900 / 1400
Height retracted
mm
917 1150 1438 1438 1040
Pump length
mm
339 577 860 860 600
Weight without container
kg
13.2 14.9 14.9 14.9 38 / 42 / 46
Maximum container height
mm
339 577 860 860 -
Maximum container size
l
20 60 200 200 -

Cookies help us deliver our services. By using our services, you agree to our use of cookies. Further Information

Close